Land Pride AFM4211 All-Flex Mowers (30 - 65HP)

The AFM4211 All-Flex Mower provides excellent cut quality and performance on lush turf grasses on expansive and well manicured areas such as fairways, parks, schoolyards, sports fields, and small estates. The AFM4211 is available with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius due to the sleek frame design. When you need to transport from one mowing site to another the hydraulic wing cylinders will easily lift the wing decks for a 7’-8" transport width. The contour following capability, highly productive 11’ cutting width, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver finely groomed surfaces at mowing speeds from 2-6 mph.


Discharge Type Rear
Cutting Width 11’ - 1”
Overall Width 11’- 3 1/2”
Transport Height 5’ - 11 1/2”
Transport Width 7’-8” At Maximum Cutting Height
Overall Length 13’- 3” Transport Position
Machine Weight 2,040 lbs.
Tractor Horsepower Minimum 30 HP and Maximum 65 HP
Hitch Pull Type With Adjustable Clevis and Safety Tow Chain
Tongue Support 2,200 lb. Capacity Screw Jack
Gearbox Support 3/8” Steel Channel
Gearboxes 540 RPM (1)-Splitter Gearbox and (3)-Wing Gearboxes
Gearbox Lubrication Gear Lube 80-90W EP
Gearbox Oil Capacity 3 - Wings: 3.5 pints
SD Splitter: 2.125 pints or OMNI Splitter: 2.5 pints
Main Driveline (1) Category lll Constant Velocity With Slip Clutch
Deck Drivelines (3) Category II
Cutting Height 1” to 5 1/2” in 1/2” increments
Deck Size and Quantity 3 each at 48”
Deck Overlap 6”
Deck Thickness 3/16”
Anti-Scalp Roller Front Center and Rear Outside Deck Corners
Blade Drive Belt (1) - B-Section
Drive Belt Tensioning Spring Loaded Idler
Blade Bearings Sealed Ball Bearings
Blades Size and Type
3 Each Per Deck
1/4” x 2 1/2” x 16 7/8” Medium Lift Standard
Optional Blades - Low Lift, High Lift & Mulching
Blade Overlap 1 3/16”
Blade Spindle Speed 3,628 RPM
Blade Tip Speed 16,020 FPM
Deck Tires 10 Each, Air 13” x 5", Sealant With Tapered Roller Bearings
Deck Wheel Spindles 1 1/4” With Nylon Bushings
Transport Tires 2 Each, 18" x 9.5", Sealant With Tapered Roller Bearings
Transport Locks Automatic Transport Locks With Pull Rope Release
Wing Flex 23 Degrees Left To Right
22 Degrees Front To Back
Center Deck Flex 13 Degrees Front To Back
Hydraulic Outlets 1 Set Required
Deck Cylinders Dual Acting
Gauge Wheel Arms 1/4” Wall Square Tubing
Turning Radius Zero Turning Radius
Mowing Capacity @ 2 MPH = 2.68 Acres Per Hour
@ 4 MPH = 5.37 Acres Per Hour
@ 6 MPH = 8.10 Acres Per Hour

Further Info

Counter blade rotation
on left hand deck
Spreads grass clippings more evenly. Wing decks throw grass away from the rear
deck. Rear deck doesn’t get covered up nor does it get bogged down by cut grass.
7'-8" transport width
at lowest cutting height
Meets most city/county codes for transport width.
6" Deck overlap Eliminates skipping when going into a tight turn.
11'-1" Cutting width – three 48" decks Sized right for golf courses, cities, schools. Small decks give excellent flexibility.
Sleek frame design, including single
beam hitch and compact deck overlap
Design allows operator to make tighter turns without leaving windrows and skips.
AFM virtually becomes a zero turn mower. (Oversized tires may not allow this.)
Automatic transport wing locks When wings are raised in the full transport position, the wings lock in place. No
need to get off the tractor to lock. Pull rope from tractor seat to un-lock.
18" Transport tires
with tapered roller bearings
Transport tires offer smooth roading and less grass compaction. Allows grass to
stand up. Tapered roller bearings offer longevity.
Removable transportation tire spindles Allows a spindle to be replaced by simply removing two bolts.
Back wheels on side decks even with
transportation tires
Allows tighter turns without skips.
Rigid rear side deck tires. Rigid wheel yokes holds hills and slopes better. Safer unit than the competition.
13" Deck tires with sealant 13" Tires offer great flotation, less lbs. per square inch. Sealant minimizes flats.
1/4" Gauge wheel arms Gives the cutter gauge wheel arms a great deal of “hidden” strength.
Low pivot points on deck The lower the pivot points are to the ground, the more side to side swing, allowing
for excellent flotation from each deck.
Deflectors built into mower decks Safety features meet ANSI standards. Many competitors use chains for protection.
Once chains are removed the unit does not meet ANSI specifications.
Rear discharge Even dispersal, discharged items are aimed downward. No rear chains are
needed, which tend to clump damp grass.
Rounded front deck edges
with no protruding skid shoe
Helps protect trees and other obstacles.
5/16" Front edge & all-welded seams Provides extra durability.
Cat. 3 Constant velocity main driveline Constant velocity main driveline allows for tighter turns without harming U-joints in
driveline, includes slip clutch option.
Cat. 2 wing drivelines Reduces start-up torque that is put on the driveline, gearbox and gearbox support.
Slip-clutch protection Guards against premature gearbox failure. Protects mower deck spindles.
ABS guards No paint to scratch off, lighter weight, no rattling or rust.
Heavy gearbox mounts on center
and side mower decks
Handles start-up torque better.
Gearbox HP Rating 30 -65 HP
Gearbox warranty 5 years on parts and labor.
Demonstrates our confidence in the gearbox’s quality and lasting performance.
Easy to grease blade spindles No guards to remove for routine greasing of blade spindles.
Middle spindle sits towards
the back of the mower deck.
Uses less horsepower and allows material to escape the mower deck easier. The
discharge of material is more even. Design eliminates windrowing.
Spring loaded idlers Applies constant tension to belt to run efficiently.
Easy belt tension release Easily release belt tension for changing belt or for winter storage.
High blade tip speed (16,260 fpm) Lifts grass up for a clean cut and efficient discharge of material.
Tip speed rates are as high or higher than the competition.
Choice of Blade
(Medium lift standard)
Others available thru parts dept.
Low Lift - Highly recommended in sandy soils where lifting isn’t crucial. Disturbs
the soil very little, allowing blades to wear longer.
Medium Lift - Medium suction for lifting grass. Requires less HP than high lift.
High Lift - Greatest suction for lifting grass before cutting. Can take higher HP in
tall dense grass. Not recommended in sandy soils.
Mulching - Perfect for leaf mulching.
Optional Hydraulic Operated Transport
Transports locks can be released easily from the tractor seat while operating the
same tractor control lever that raises and lowers the mower decks. Eliminates
pulling a rope to release transport locks.