Energreen RoboMAX
Energreen RoboMAX is a robust forestry mulcher that can easily work in different tasks and works. The standard equipment includes two hydraulic double-effect functions. Designed to satisfy the most different needs, Energreen RoboMAX can be defined as a multifunctional remote controlled machine, with power and performance comparable to a traditional tractor with several attachments. The main features that make the difference about this machine among all other robots are power, reliability, strenghtness, high performance and versatility and a powerful Diesel 75 Hp engine.
Safety and Comfort
– Radio controlled machine
– Operator in safety zone
– Emergency button on remote control
– Excellent maneuverability
– Easy to use and carry
Multifunction
– Several available tools
– Road and river maintenance
– Green maintenance and forestry work
– Agriculture and industry service
– Winter road service
Working on steep slopes
– Special design of the track
– Excellent grip in all directions up to 55°
– Special oil sump
– Low center of gravity
Productivity
– Engine 75 HP Stage V
– Quick change of equipment
– Fast execution of work
– Maneuverability on any surface
WORKING ON STEEP SLOPES UP TO 55°
The special design of the tracks and its tensioning system makes RoboMAX a safe machine for working on slopes up to 55° in any direction: hilly and mountainous areas, slopes, embankments, and in all those places where the adherence is very low and where a machine for high slopes is required.
TRACKS DESIGN FOR A BETTER ADHERENCE ON THE GROUND
The new RoboMAX tracks profile allows a better adherence of the machine on the ground; in this way the grass is preserved, and it is always possible to work with an excellent grip and adherence in each direction on all kinds of surfaces.
RUBBER TRACKS
Ideal for delicate surfaces
– 350 mm width
– Excellent adherence to the ground
– Working on sloping areas up to 40°
SUPER RUBBER TRACKS
Ideal tracks for forestry works
or areas with dense vegetation
– 350 mm width
– Wide supporting surface
with consequent less weight per cm²
– Work on sloping areas up to 55°
STEEL TRACKS
Ideal tracks for rocky
or wet surfaces
– 300 mm width
– Excellent adherence to the ground
– Work on sloping areas up to 55°
TECHNICAL FEATURES
Cogwheel of the tracks in tempered steel
Adaptor with hydraulic motor
Track tensioner with safety spring
RELIABILITY & PERFORMANCE
RoboMAX is built in an ultra-resistant steel to ensure a long duration; all the components are tested and certified to ensure the maximum reliability and safety.
Engine tested by the producer with a remarkable reputation for the reliability.
Remote-control technology developed by a team of specialized experts.
Powerful and efficient turbo engine, appropriate for steep slopes.
Engine crankcase designed to ensure the lubrication, even on steep slopes.
Double roll bar integrated into the frame to ensure a total protection of the machine.
Independent cooling system of the hydraulic system to optimize the performances.
Flat bottom frame to protect the parts of the engine and prevent the entrance of cut vegetation to protect all the components.
Born to satisfy the most difficult needs, RoboMAX can easily be defined a remote-controlled grass cutting machine with power and performances comparable to a classic grass cutting arm for a tractor. These fundamental characteristics distinguish this machine from any other robot used for grass cutting: power, reliability, strength and high efficiency.
TECHNICAL INNOVATIONS
TECHNICAL DATA & DIMENSIONS
| Technical Data RoboMAX | |
|---|---|
| Maximum slope in all directions | 55° |
| Transmission | Hydrostatisc |
| Low range speed | 0 - 2,5 km/h |
| High range speed | 0 - 5,5 km/h |
| Machine weight with super rubber tracks | 2470 / 2640 kg* |
| * Without equipment, with rubber tracks / steel tracks | |
| Technical Data Engine RoboEVO | |
|---|---|
| Brand | Yanmar |
| Type | 4-Cylinder Diesel |
| Power | 75 HP (55 kW) - Stage V - EU 1628/2016 - Tier 4f |
| Fuel Tank Capacity | 60 litres / 16 gal. |
| Working RPM | 2500 rpm |
SAFETY & COMFORT
THE LIGHTWEIGHT REMOTE CONTROL, INTUITIVE AND EASY TO MASTER
RoboMAX is a remote-controlled forestry mulcher, able to work in complete safety in hilly and dangerous areas, with slopes up to 55° in any direction. The exceptional stability of the machine is given by a low center of gravity, a special oil sump and rubber tracks for an excellent grip even in mountainous zones. The safety of operators is one of our targets; the use of the remote control with up to 150 m range avoids several work risks to the operator: noise, vibrations, exposure to exhaust emissions, spray of cut vegetation or debris, etc. Two large joysticks provide precise control of movement, steering and flailhead height. The simple layout of the controls allows the operator to start working immediately. Speed and steering control can also be adjusted to better satisfy personal needs.
| Remote Control Technical Data | |
|---|---|
| Brand | Autec |
| Radio frequency | 870 Mhz (EU) / 915 Mhz (US) |
| Work Range | 150m |
| Joystick | Proportional |
| Battery | Rechargeable |
| Autonomy | 18 h |
| Overall dimensions | 260x200x190 mm |
| Weight | 2 kg |
THE TOOL FOR EVERY JOB
A selection of professional equipment specially developed for the best use and control of the forestry mulcher RoboMAX.
